Panel FRP 3D nwere resin
The 3-D Fiberglass ákwà akwa nwere ike mejupụtara dị iche iche resins (polyester, epoxy, Phenolic na wdg), mgbe ikpeazụ ngwaahịa bụ 3D mejupụtara panel.
Uru
1. dị arọ bur elu ike
2. Nnukwu nguzogide megide delamination
3. Nhazi dị elu - ntụgharị
4. Oghere n'etiti abụọ oche n'ígwé nwere ike multifunctional (Embedded na sensọ na wires ma ọ bụ nye ya na ụfụfụ)
5. Usoro lamination dị mfe ma dị irè
6. Mkpuchi ọkụ na mkpuchi ụda, ọkụ na-ekpuchi ọkụ, Wave na-ebufe
Ngwa
Nkọwapụta
| Ogidi elu | mm | 4.0 | 6.0 | 8.0 | 10.0 | 12.0 | 15.0 | 20.0 | |
| Njupụta Warp | mgbọrọgwụ / 10cm | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| Njupụta Weft | mgbọrọgwụ / 10cm | 96 | 96 | 96 | 96 | 96 | 96 | 96 | |
| Njupụta ihu | 3-D spacer akwa | n'arọ/m2 | 0.96 | 1.01 | 1.12 | 1.24 | 1.37 | 1.52 | 1.72 |
| 3-D spacer akwa na Sanwichi ewu | n'arọ/m2 | 1.88 | 2.05 | 2.18 | 2.45 | 2.64 | 2.85 | 3.16 | |
| Ike tensile dị larịị | MPa | 7.5 | 7.0 | 5.1 | 4.0 | 3.2 | 2.1 | 0.9 | |
| Ike Compressive Flatwise | MPa | 8.2 | 7.3 | 3.8 | 3.3 | 2.5 | 2.0 | 1.2 | |
| Module mkpakọ dị larịị | MPa | 27.4 | 41.1 | 32.5 | 43.4 | 35.1 | 30.1 | 26.3 | |
| Ike Shear | Warp | MPa | 2.9 | 2.5 | 1.3 | 0.9 | 0.8 | 0.6 | 0.3 |
| Weft | MPa | 6.0 | 4.1 | 2.3 | 1.5 | 1.3 | 1.1 | 0.9 | |
| Modulu shear | Warp | MPa | 7.2 | 6.9 | 5.4 | 4.3 | 2.6 | 2.1 | 1.8 |
| Weft | MPa | 9.0 | 8.7 | 8.5 | 7.8 | 4.7 | 4.2 | 3.1 | |
| Na-ehulata Rigidity | Warp | N.m2 | 1.1 | 1.9 | 3.3 | 9.5 | 13.5 | 21.3 | 32.0 |
| Weft | N.m2 | 2.8 | 4.9 | 8.1 | 14.2 | 18.2 | 26.1 | 55.8 | |
Rịba ama: Ndekọ arụmọrụ dị n'elu maka ebumnuche ozi naanị, dabere na ihe onye ọrụ chọrọ, enwere ike ịhazi nhazi akwa akwa 3D.
Dee ozi gị ebe a ziga anyị ya